[Help] ODBC Error
- Thread starter Life
- Start date
Gam3*BoY
Active Member
- Joined
- Dec 5, 2008
- Messages
- 497
- Reaction score
- 89
Method 1 - Enabling the Registry with VBScript
Doug Knox, a Microsoft Most Valuable Professional, has created a VBScript that enables or disables the Registry Editor based on the following location in the registry. Of course, since the registry editor is disabled, you can't change it manually, so Doug wrote a Visual Basic Script to accomplish the task.
HKey_Current_User\Software\Microsoft\Windows\CurrentVersion\Policies\System\
Visit Doug's page and download Registry Tools VBScript to your desktop, double-click on it to run it, then reboot your computer and try to open the Registry Editor.
If this fix didn't solve your problem, try method two shown below.
Method 2: Use Symantec's tool to reset shell\open\command registry keys
Sometimes worms and trojans will make changes to the shell\open\command registry entries as part of their infections. This will cause the virus to run each time you try to run an .exe file such as the Registry Editor. In these cases, visit Symantec's website and download the UnHookExec.inf file to your desktop. Right-click on it and choose Install. Restart your computer and then try to open the Registry Editor.
Method 3: Rename Regedit.com to Regedit.exe
Some viruses and other malware will load a regedit.com file that is many times a zero byte dummy file. Because .com files have preference over .exe files when executed if you type REGEDIT in the run line, it will run the regedit.com instead of the real regedit.exe file.
Delete the regedit.com file if its a zero byte file to restore access to REGEDIT. In some cases, such as the W32.Navidad worm, you'll need to rename the REGEDIT file to get it to work.
Method 4: Windows XP Professional and Group Policy Editor
If you have Windows XP Professional and access to an administrative user account, you could change the registry editor options in the Group Policy Editor.
1. Click Start, Run
2. Type GPEDIT.MSC and Press Enter
3. Go to the following location
* User Configuration
* Administrative Templates
* System
4. In the Settings Window, find the option for "Prevent Access to Registry Editing Tools" and double-click on it to change.
5. Select Disabled or Not Configured and choose OK
6. Close the Group Policy Editor and restart your computer
7. Try opening REGEDIT again
P.S Сам си отговори защо ти прави така
Doug Knox, a Microsoft Most Valuable Professional, has created a VBScript that enables or disables the Registry Editor based on the following location in the registry. Of course, since the registry editor is disabled, you can't change it manually, so Doug wrote a Visual Basic Script to accomplish the task.
HKey_Current_User\Software\Microsoft\Windows\CurrentVersion\Policies\System\
Visit Doug's page and download Registry Tools VBScript to your desktop, double-click on it to run it, then reboot your computer and try to open the Registry Editor.
If this fix didn't solve your problem, try method two shown below.
Method 2: Use Symantec's tool to reset shell\open\command registry keys
Sometimes worms and trojans will make changes to the shell\open\command registry entries as part of their infections. This will cause the virus to run each time you try to run an .exe file such as the Registry Editor. In these cases, visit Symantec's website and download the UnHookExec.inf file to your desktop. Right-click on it and choose Install. Restart your computer and then try to open the Registry Editor.
Method 3: Rename Regedit.com to Regedit.exe
Some viruses and other malware will load a regedit.com file that is many times a zero byte dummy file. Because .com files have preference over .exe files when executed if you type REGEDIT in the run line, it will run the regedit.com instead of the real regedit.exe file.
Delete the regedit.com file if its a zero byte file to restore access to REGEDIT. In some cases, such as the W32.Navidad worm, you'll need to rename the REGEDIT file to get it to work.
Method 4: Windows XP Professional and Group Policy Editor
If you have Windows XP Professional and access to an administrative user account, you could change the registry editor options in the Group Policy Editor.
1. Click Start, Run
2. Type GPEDIT.MSC and Press Enter
3. Go to the following location
* User Configuration
* Administrative Templates
* System
4. In the Settings Window, find the option for "Prevent Access to Registry Editing Tools" and double-click on it to change.
5. Select Disabled or Not Configured and choose OK
6. Close the Group Policy Editor and restart your computer
7. Try opening REGEDIT again
P.S Сам си отговори защо ти прави така
f0und
Active Member
- Joined
- Aug 18, 2009
- Messages
- 269
- Reaction score
- 119
ако не си оправил проблема ето ти едно което ще го фиксне така да се каже и няма да имаш проблем аз имам същия проблем но го фикс със тази програмка ето DOX.bg - ODBC FIX
- Joined
- Nov 13, 2008
- Messages
- 1,367
- Reaction score
- 509
'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing
?
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing'Enable Registry Editing'
'© Veegertx - 4/7/2004
'This code may be freely distributed/modified
On Error Resume Next
'Prevents errors from values that don't exist
Set WshShell = WScript.CreateObject("WScript.Shell")
'Delete DisableRegistryTools registry values
WshShell.RegDelete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
WshShell.RegDelete "HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
'display message
Message = "You should have access to Regedit now"
X = MsgBox(Message, vbOKOnly, "Done")
Set WshShell = Nothing
Set fso = Nothing
?
